User Guide

The SuperWheel uses reactive forces to generate additional torque thereby providing power assistance. In order to obtian the greatest benefit from the Superwheel, we recommend the following:

70 to 90 PSIEasy cycling assistance
Over 90 PSIHigh performance

Note: Do not inflate the tyres above the maximum pressure indicated by the manufacturer. This information is found on the side wall of the tyre.

The higher the tire pressure, the higher the power output. The springs may need to be to adjusted to higher tension when the tyre pressure is increased.

Please note: The system will stop functioning when the spring tension is set higher than the input energy. After riding, you will get to know the correct spring settings.

Four steps to fit the Superwheel

  1. Open the brake calipers (to allow the removal of the existing wheel)
  2. Remove your back wheel
  3. Fit the Superwheel on the bike and scure the quick release
  4. Reset your brake caliper to ensure free movement of the wheel and efficient stopping.


Spring Adjustment

There are 3 types of spring sets: under 75kg (165 lbs), 75kg to 90kg, and over 90kg (200 lbs. Please ensure which type of spring set is suitable for you. The reference to weight means the weight of the rider and any cargo carried on the bike. If you need a second set of spring for your partner, friends or family to share the joy of cycling with SuperWheel. Additional sets of springs are available please contact us if you would like to order additional springs.

To adjust the springs, you will need a 13mm spanner (wrench).

Look after your components

The SuperWheel was developed for efficient city commuting, flat pathways and uphill cycling. Try to avoid long and steep uphill climbing, as it may damage the stoppers on the internal drive mechanism.

General maintenance

  1. Keep the springs and freewheel clean and lubricated
  2. Make sure your brakes are adjusted correctly
  3. Maintain ideal tyre pressure. The system does not activate with pressure under 70 psi. Do not exceed the maximum pressure as specified by the tyre manufacturer.
  4. In the event of misalignment or technical issues, please contact us. Do not open the system.